Hybrid self-textured running track

Product name: Hybrid self-textured running track

Introduction: 

The hybrid self-textured track is a high-end hybrid plastic track formed by particle-free spraying. It adopts a three-layer composite structure and a special PU glue self-textured process. The surface layer has no solid particles and naturally forms an anti-slip texture. It has excellent sports performance, durability and environmental friendliness, and is the preferred high-end paving type for professional sports venues and campus track and field fields.

Core performance advantages：

1.Excellent sports protection: 

Shock absorption: 35%-50%, 

Vertical deformation: 0.6-2.5mm

Can effectively buffer the impact force on the feet, reduce joint injuries such as ankles and knees, and at the same time, the rebound is uniform, helping to improve sports performance.

2.Durable and anti-slip dual excellence:

Anti-slip value ≥47BPN, texture anti-slip effect meets the standards of the International Association of Athletics Federations, less likely to slip in rainy days; The wear resistance is less than 2.5%, it is scratch-resistant and nail-resistant, and its service life is 20% longer than that of traditional spray-grained running tracks.

3.Weather resistance and long-lasting beauty: 

Resistant to ultraviolet rays, ozone and acid rain erosion, the color does not fade for a long time, and the particle-free surface layer makes the lines clear and full, remaining as good as new over time.

4.Environmentally friendly and easy to maintain: 

It adopts MDI series environmentally friendly PU raw materials, contains no toxic or harmful substances such as benzene and toluene, and the content of soluble heavy metals is far below the national standard limit. The surface is dense and pore-free, with strong anti-fouling properties. It can be rinsed with clean water on a daily basis. The maintenance cost is about 30% lower than that of granular running tracks.

5.Stable structure: 

It has strong adhesive force, can suppress the rise of moisture, and has no problems such as bubbling, delamination or cracking. It can meet the all-weather usage requirements in most areas above -16℃.

Key points of construction: 

With cement/asphalt as the base layer and constructed through standardized procedures, the core steps are:

1.Basic treatment: 

Level and repair, dry and remove dirt to ensure that the flatness error is ≤3mm/3m and the moisture content is ≤8%. Apply special primer to enhance adhesion.

2.Layer-by-layer spreading: 

Spread the base layer and the elastic stabilizing layer in sequence. Adjust the catalyst ratio according to the temperature to avoid curing and foaming affecting the quality.

3.Surface coating: 

Special equipment is used to spray self-textured surface slurry, which naturally forms an anti-slip texture without the need for subsequent particle scattering treatment.

4.Marking and curing: 

Mark precisely in accordance with the standards of the International Association of Athletics Federations. Allow overall ventilation and curing for 7 to 10 days. After passing the acceptance inspection, it can be put into use.

Applicable scene

It is widely applicable to the competition tracks of professional sports venues, training grounds of sports schools, and the track -and- field ground of primary and secondary schools as well as colleges and universities. It can also be used in fitness paths for all and indoor sports halls and other frequently used sports fields. However, it is not suitable for high-cold and snowy areas.